AMX Novara SP-08-E-US, Instruction Manual

Page: 33 / 37

Programming Ethernet Keypads
26 Instruction Manual - Novara Ethernet Keypads
Terminal Commands (Cont.)
Command Description
SET DNS Set the DNS configuration of the EXB Module, only as applied to Static IP
addressing mode (DNS settings in DHCP mode are received from the DHCP
server).
Syntax:
SET DNS <D:P:S>
This command prompts you to enter a Domain Name, DNS IP #1, DNS IP #2, and
DNS IP #3.
• Enter Y (yes) to approve/store the information in the Master.
• Enter N (no) cancels the operation.
Note : The device must be rebooted to enable new settings.
Example:
>SET DNS [0:1:0]
-- Enter New Values or just hit Enter to keep current settings --
Enter Domain Suffix: amx.com
Enter DNS Entry 1 : 192.168.20.5
Enter DNS Entry 2 : 12.18.110.8
Enter DNS Entry 3 : 12.18.110.7
You have entered: Domain Name: amx.com
DNS Entry 1: 192.168.20.5
DNS Entry 2: 12.18.110.8
DNS Entry 3: 12.18.110.7
Is this correct? Type Y or N and Enter -> Y
Settings written. Device must be rebooted to enable new settings
SET ETHERNET MODE This command sets the current LAN configuration settings per new mode.
Syntax:
SET ETHERNET MODE <newmode>
Values for newmode are:
auto
- or -
10 | 100 full | half
Note : This command requires a reboot to enable new settings.
Examples :
set ethernet mode auto
set ethernet mode 100 full
Note : See the GET ETHERNET MODE command on page 24 .
SET FRIENDLY Set the device’s friendly name for NDP to <name>.
Syntax:
SET FRIENDLY <name>
• Maximum length = 25 characters. If the name entered exceeds 25 characters, it
will be truncated.
• The value is stored in non-volatile memory.
• If no value specified, an automatic name consisting of AMX, the product name,
and serial number will be used.
Note : This command requires a reboot to enable new settings.