![background image](http://html.mh-extra.com/html/amx/netlinx-nxb-knx/netlinx-nxb-knx_operation-reference-manual_2938117034.webp)
NetLinx Programming
28
NXB-KNX Operation/Reference Guide
NetLinx Send_Commands (Cont.)
Command
Description
LIST LOAD
Reads the entries in
table written with LIST
SAVE.
Reads the entries in table written with LIST SAVE from CF and back.
• The current table is replaced with the read one.
• File name is optional.
• If no file name is specified, the default file name is used.
• Default file name: KNXTableNX.TXT
Note
: In terminal connection with master the already available files on CF can be
listed by entering "List" (no SEND_COMMAND to device).
Syntax:
LIST LOAD [<Filename>]
Examples:
SEND_COMMAND dvKNX,'LIST LOAD'
SEND_COMMAND dvKNX,'LIST LOAD MyTable.txt'
LIST POLL
List all poll triggers.
List all poll triggers with AMX number and KNX group address
Syntax:
LIST POLL
Example:
SEND_COMMAND dvKNX,'LIST POLL'
LIST SAVE
Writes the current KNX
table, including poll
trigger, as text file on
CF.
This file can be edited with simple text editor.
The entries correspond with the structure of the regular table. Thus a table can be
buffered, modified (i.e. delete or add actuators) and finally reconstructed with LOAD
(see above)
• File name is optional.
• If no file name is specified, the default file name is used.
• Default file name: KNXTableNX.TXT
Note
: In monitor connection with master the already available files on CF can be
listed by entering "list" (no SEND_COMMAND to device).
Syntax:
LIST SAVE [<Filename>]
Examples:
SEND_COMMAND dvKNX,'LIST SAVE'
SEND_COMMAND dvKNX,'LIST SAVE MyTable.txt'
LIST SUM
List sum of all types,
sum of all actuators
Example:
SEND_COMMAND dvKNX,'LIST SUM'
LIST WATCH
List currently observed
actuator
List currently observed actuator with KNX group address, current value, set flags (if
applicable) and resulting additional feedback values
Example:
SEND_COMMAND dvKNX,'LIST WATCH'