![background image](http://html.mh-extra.com/html/amx/netlinx-nxb-knx/netlinx-nxb-knx_operation-reference-manual_2938117045.webp)
Cross-Line Communication
39
NXB-KNX Operation/Reference Guide
Cross-Line Communication
Overview
In many cases cross-line communication is required. In order to enable cross line communication a KNX
programmer will need to utilize the AMX NXB-KNX Virtual Device. This ETS device entry will serve as the
NXB-KNX device in ETS3.
The NXB-KNX is not a native KNX device and so it cannot be directly programmed from within ETS3. The
AMX NXB-KNX Virtual Device will allow a programmer to configure cross line communication between
KNX devices and the NXB-KNX.
The AMX NXB-KNX Virtual Device, once configured as desired, will allow ETS3 to calculate the appropriate
routing tables for line and area couplers.
Integrating the NXB-KNX Virtual Device Into An ETS3 Project
The following are the basic steps for integrating the NXB-KNX Virtual Device into an existing ETS project:
1.
Open an existing ETS3 project.
2.
Select
File > Import
to invoke the
Import
dialog (FIG. 23):
3.
Locate and select the
NXB-KNX Virtual Device.vd4
file, and click
Open
.
This action invokes the
Selective Import
dialog (FIG. 24):
FIG. 23
ETS3 - Import dialog