manualshive.com logo in svg

AMX NetLinx NXB-KNX, Operation/Reference Manual

Share
Download
AMX NetLinx NXB-KNX Operation/Reference Manual Download Page 50

NetLinx Firmware Upgrades

44

 NXB-KNX Operation/Reference Guide

Once the unit has been upgraded, the NXB-KNX will function as a native NetLinx device, and all 
subsequent Firmware upgrades are handled via NetLinx Studio, using KIT files (like any other native 
NetLinx device). 

2.

Verify you have the latest version of NetLinx Studio on your PC. Use the 

Web Update

 option in NetLinx 

Studio’s Help menu to obtain the latest version. Alternatively, go to www.amx.com and login as a Dealer 
to download the latest version.

3.

Go to 

www.amx.com

 and download the latest Firmware file. Firmware files are available to download 

from www.amx.com - on the product’s page in the online catalog.

4.

Verify that an Ethernet cable is connected from the NetLinx Master to the Ethernet Hub.

5.

Verify that the NetLinx Master is powered On.

6.

Determine the Device Number assigned to the target NXB-KNX. 

 

By default, the Device Number assigned to the NXB-KNX is 

0 

(zero). 

 

The Device Number can be viewed/edited in the NXB-KNX Configuration Manager - Device 
Configuration Page (see the 

Device Configuration

section on page 8 for details).

7.

Launch NetLinx Studio and open the Online Device Tree.

Sending a Firmware (*.KIT) File To the NXB-KNX

Use the 

Firmware Transfers

 options in the Tools menu to update the firmware in the NXB-KNX. NetLinx 

Devices such as the NXB-KNX use KIT files for firmware upgrades. 

 

The Online Device Tree (Online Tree tab of the Workspace Window) displays information about 
each online device, including the current firmware version.

 

Before attempting to upgrade the firmware, you must have the appropriate Kit file for your 
NXB-KNX.

 

To help alleviate system or network latency issues during file transfer, place KIT files in a "local" 
drive for speedy throughput.

1.

Choose 

Tools > Firmware Transfers > Send to NetLinx Device

 to open the 

Send To NetLinx Device 

dialog (FIG. 30). 

A Kit file (*.KIT) is a package of several files, all of which are required to upgrade the 
firmware, and are available online via www.amx.com. Firmware download links are 
provided in the relevant product page. 

FIG. 30  

Send To NetLinx Device dialog (NetLinx Studio)

Browse for folder
containing the KIT file

Summary of Contents for NetLinx NXB-KNX





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands