![background image](http://html.mh-extra.com/html/amx/netlinx-nxb-knx/netlinx-nxb-knx_operation-reference-manual_2938117033.webp)
NetLinx Programming
27
NXB-KNX Operation/Reference Guide
NetLinx Send_Commands (Cont.)
Command
Description
LIST <No> <No2>
List actuators in the
range of <No> to
<No2>.
List actuators in the range of <No> to <No2> (AMX numbers) with KNX group
address, current value, set flags (if applicable) and resulting additional feedback
values
Syntax:
LIST <No>-<No2>
Parameters:
<No> = AMX Number of Actuator (range = 1 - 3000) (Start)
<No2> = AMX Number of Actuator (range = 1 - 3000) (End)
Example:
SEND_COMMAND dvKNX,'LIST 17-24'
LIST <Type>
List all entered
actuators.
List all entered actuators with AMX number, KNX group address, current value, set
flags (if applicable) and resulting additional feedback values.
Also provides a sum of all actuators of one Type.
Syntax:
LIST <Type>
Parameters;
• <Type> = Data Type, where:
SW or SWITCH - 1Bit Actuators
CO or CONTROL = 2Bit Actuators
D4 or DIM4 = 4Bit Actuators
1B or 1BYTE = 1Byte Actuators
2B or 2BYTE = 2Byte Actuators
3B or 3BYTE = 3Byte Actuators
4B or 4BYTE = 4Byte Actuators
Example:
SEND_COMMAND dvKNX,'LIST 1B'
LIST BIND
List all bind triggers.
List all bind triggers with AMX number and KNX group address.
Syntax:
LIST BIND
Example:
SEND_COMMAND dvKNX, 'LIST BIND'
LIST FLAGS
List ALL actuators with
assigned flags.
List
all
actuators with assigned flags in table with KNX group address, current value,
set flags (if applicable) and resulting additional feedback values
Syntax:
LIST FLAGS
Example:
SEND_COMMAND dvKNX,'LIST FLAGS'
LIST GAPS
List free (unused) AMX
numbers
Example:
SEND_COMMAND dvKNX,'LIST GAPS'