![background image](http://html.mh-extra.com/html/amx/netlinx-nxb-knx/netlinx-nxb-knx_operation-reference-manual_2938117017.webp)
Configuration
11
NXB-KNX Operation/Reference Guide
IP Settings
Select
IP Settings
from the Admin drop-down menu to open the
IP Settings
page (FIG. 14). Use the options
on the page to specify network/IP settings for this NXB-KNX unit.
FIG. 14
IP Settings page
Hostname:
Enter a Hostname for this unit (enabled only if DHCP is disabled).
DHCP:
Click to toggle DHCP on this unit (default = enabled).
Note that DHCP must be enabled in order for the zero-configuration client (i.e.
Bonjour for Windows) to detect the NXB-KNX on the network.
See the
NetLinx Studio v3.0 (featuring Zero-Config functionality)
section on
page 5 for details.
IP Address:
Enter an IP Address for this unit (enabled only if DHCP is disabled).
Subnet Mask:
Enter a Subnet Mask for this unit (enabled only if DHCP is disabled).
Gateway:
Enter a Gateway for this unit (enabled only if DHCP is disabled).
Domain Suffix:
Enter the Domain Suffix for this unit.
DNS 1, 2, 3:
Enter up to three DNS addresses for this unit.
Reboot:
Click to initiate a system reboot.
IP Settings changes only take effect after a reboot.