![background image](http://html.mh-extra.com/html/amx/netlinx-nxb-knx/netlinx-nxb-knx_operation-reference-manual_2938117015.webp)
Configuration
9
NXB-KNX Operation/Reference Guide
To establish communication between the NXB-KNX and a specific NetLinx Master:
1.
Enter the Master’s IP/URL in the
Master IP/URL
text field.
2.
The default
Master Port Number
assignment is
1319
- do not change this number.
3.
Under
Authentication Settings
, enter the NetLinx Master’s
Username
and
Password
(only required if the
target NetLinx Master has Authentication enabled).
4.
Press
Accept
to save changes.
5.
Press
Reboot
to reboot the NXB-KNX. Once rebooted, the NXB-KNX should be in communication with
the Specified NetLinx Master (indicated by a steady blink on the NXB-KNX Status LED).
Security Settings
Select
Security Settings
from the Admin menu to open the
Security Settings
page (FIG. 12). Use the options
on the page to specify security options and login information for this NXB-KNX unit.
Enable / Disable Security Settings
FIG. 12
Security Settings page
Web Security:
Click this checkbox to enable Web Security.
When Web security is enabled, a username and password are
required to access any system Web pages.
Default = disabled
Telnet Security:
Click this checkbox to enable Telnet Security.
With Telnet Security enabled, a username and password are
required to establish a Telnet or SSH connection.
Default = disabled
Admin Security:
Click this checkbox to enable Admin Security.
With Admin Security enabled, a username and password are
required to modify any system configuration item.
Default = disabled
Restore Factory Defaults:
Click to restore all security settings to their factory defaults.
Default = All Disabled