![background image](http://html.mh-extra.com/html/amx/netlinx-nxb-knx/netlinx-nxb-knx_operation-reference-manual_2938117020.webp)
Configuration
14
NXB-KNX Operation/Reference Guide
The options on the Mode Manager page provide inputs for selecting the current mode of the system time:
Click
Accept
to save your changes. Note that changes on this page take effect immediately.
Click
Cancel
to cancel any changes.
Clock Manager - Daylight Savings
Select
Daylight Savings
from the Clock Manager sub-menu (or from the main Clock Manager page), and the
Daylight Savings Manager
page will be displayed (FIG. 19):
Note that this tab is enabled only if
Network Time
is selected (on the Mode Manager page).
Time Sync:
Use the radio buttons to select either
Network Time
or
StandAlone
.
Note
: If using StandAlone mode, the time will be valid only until the unit is
rebooted. Once the unit is rebooted, the time will be lost, and will have to be
reset.
Note that the
Daylight Savings
and
NIST Servers
tabs are enabled only if
Network Time
is selected as the mode.
Re Sync Period:
Select the desired re-synch period for the clock from this drop-down menu. Re-
synch period options include 5 minutes, 15 minutes, 1, 2 and 4 hours
(default = 1 hour).
Timezone:
Select the appropriate Time Zone from the drop-down menu.
Date:
Use these fields to manually enter today’s date (mm/dd/yyyy).
Time:
Manually enter the current time (hh:mm:ss).
FIG. 19
Clock Manager - Daylight Savings Manager page