Terminal (Program Port/Telnet) Commands
100
NI Series WebConsole & Programming Guide
Terminal Commands (Cont.)
Command
Description
DEVICE STATUS <D:P:S>
Displays a list of all active (on) channels for the specified D:P:S.
If you enter DEVICE STATUS without the D:P:S variable, the Master
displays ports, channels, and version information.
DIPSWITCH
Displays the current state of the Master controller's hardware
dipswitches.
DISK FREE
Displays the total bytes of free space available on the Master.
Example:
>DISK FREE
The disk has 2441216 bytes of free space.
DNS LIST <D:P:S>
Displays the DNS configuration of a specific device including:
• Domain suffix·
• Configured DNS IP Information
Example:
>DNS LIST [0:1:0]
Domain suffix:amx.com
The following DNS IPs are configured
Entry 1-192.168.20.5
Entry 2-12.18.110.8
Entry 3-12.18.110.7
ECHO ON|OFF
Enables/Disables echo (display) of typed characters.
GET DEVICE HOLDOFF
Displays the state of the Master’s device holdoff setting.
Note
: This command reveals the state of the device holdoff set using
the DEVICE HOLDOFF ON|OFF command.
Example:
>GET DEVICE HOLDOFF
Device Holdoff is off.
GET DUET MEMORY
Display the amount of memory allocated for Duet Java pool. This is
the current Java memory heap size as measured in Megabytes. An
example is a value of 5 = 5 MB.
GET ETHERNET MODE
Displays the current ethernet configuration setting.
Settings are either "auto" in which the ethernet driver will discover it's
settings based on the network it is connected to OR <speed> and
<duplex> where speed is either 10 or 100 and duplex is either full or
half.
Example:
>GET ETHERNET MODE
Ethernet mode is auto.
Note
: See SET ETHERNET MODE.
GET IP <D:P:S>
Displays the IP configuration of a device.
If you enter GET IP without the D:P:S variable, the Master displays it’s
D:P:S, Host Name, Type (
DHCP
or
Static
), IP Address, Subnet Mask,
Gateway IP, and MAC Address.
Example:
>GET IP [0:1:50]
IP Settings for 0:1:50
HostName MLK_INSTRUCTOR
Type DHCP
IP Address 192.168.21.101
Subnet Mask 255.255.255.0
Gateway IP 192.168.21.2
MAC Address 00:60:9f:90:0d:39
Summary of Contents for NetLinx Master-Ethernet Card/Module NXC-ME260
