AMX NetLinx Master-Ethernet Card/Module NXC-ME260, Programming Manual

Page: 46 / 162

WebConsole - Security Options
38 NI Series WebConsole & Programming Guide
Viewing Group Security Settings Details
Click on any Group listed in the Group Security Details page to expand the view to show details for the
selected user Group (FIG. 24):
Click the Edit button to edit the Security Access options for the selected user group.
Click Delete to delete the selected User Group from the Master.
Modifying the Properties of an Existing Group
1.
Select the Group Level tab (in the Security section) to open the Group Security Details page.
2.
Click the Edit button to open the Group Security Details page for the selected group (FIG. 25).
3.
Modify the previously configured access rights by enabling / disabling the checkboxes. See the
Group and User Security Access Options section on page 36 for details.
4.
Modify the selected group’s directory access rights in the Group Directory Associations section, as
necessary (place / remove checkmarks next to the available directories).
5.
Click the Accept button to save your changes to the Master.
If there are no errors with the modification of any of this page’s parameters, a “ Group updated
successfully ” is displayed at the top of the page.
FIG. 24 Group Security Details Page
Click to add a new Group