AMX NetLinx Master-Ethernet Card/Module NXC-ME260, Programming Manual

Page: 149 / 162

Appendix A: IPSec Configuration File
141 NI Series WebConsole & Programming Guide
mkmAddTunnel
mkmAddTunnel
NAME mkmAddTunnel – add a tunnel mode Security Association
SYNOPSIS
mkmAddTunnel=cptr_mkm_sa
DESCRIPTION This rule adds a tunnel mode Security Association (SA). After adding an SA and setting the
associated transform ID and keys, mkmCommit must be called to commit the SA to the Secu-
rity Association Database (SADB).
Rule Value :
cptr_mkm_sa
A string formatted as follows:
saNumber,protocolSelector[/destinationPort/sourcePort],
destinationAddressSelector,sourceAddressSelector,directionality,
tunnelEndpointIPAddress,networkInterfaceAddress
where
-
saNumber is a decValue, a unique number to be assigned to the SA.
- protocolSelector is the IANA IP protocol number, decValue | ANY. Use 6 for TCP or 17 for
UDP.
-
destinationPort and sourcePort are:
decValue | ANY.
- destinationAddressSelector and sourceAddressSelector are:
ipAddress1[-ipAddress2 | /ipMaskPrefix].
- directionality is IN | OUT. If IN then this policy applies to traffic coming into the current host.
If OUT it applies to traffic going out of the current host. A mirrored policy will automatically be
created for the opposite traffic flow.
-
tunnelEndpointIPAddress is the identity of the remote gateway, for example "10.9.9.180" for
the IPv4 address.
-
networkInterfaceAddress is the IP address of the network interface to which the inbound SA
is bound.
EXAMPLES IPv4:
mkmAddTunnel=6,17/ANY/ANY,100.100.100.0/24,100.100.200.4,
OUT,100.100.100.4,100.100.99.1")
mkmAddTunnel=7,ANY,10.8.30.30,0.0.0.0/0,IN,100.100.100.4,
100.100.99.1
IPv6:
mkmAddTunnel=6,17/ANY/ANY,3ffe:2::/64,3ffe:3::1,OUT,3ffe:2::2,
3ffe:1::2
mkmAddTunnel=7,ANY,3ffe:3::1,::/0,IN,3ffe:2::2,3ffe:1::2
Config String
Format
saNumber.protocolSelector[/destinationPort/sourcePort],
destinationAddressSelector,sourceAddressSelector,directionality,
tunnelEndpointIPAddress,networkInterfaceAddress