AMX NetLinx Master-Ethernet Card/Module NXC-ME260 Programming Manual Download

Page: 73 / 162

WebConsole - System Options

NI Series WebConsole & Programming Guide

Example:

AMX Meeting Manager

and

i!-Voting

applications are examples of products that require

both a Product serial number and a Master-specific key prior to usage.

Press the

Accept

button to save the information. If there are no errors with the information on this

page, a “

Key successfully added for Product ID XXXX

” is displayed at the top of the page.

Removing a License

Click the

Remove

(x) icon to the left of the license that you want to remove.

The system will prompt you to verify this action before the license is removed from the Master.
Click

to proceed.

Press the

Accept

button to save the information.

FIG. 45

Manage License - Add a License page

Summary of Contents for NetLinx Master-Ethernet Card/Module NXC-ME260



































































































































































Search results

Summary of Contents for NetLinx Master-Ethernet Card/Module NXC-ME260

Reviews:

Related manuals for NetLinx Master-Ethernet Card/Module NXC-ME260

Brands by name

Popular brands

AMX NetLinx Master-Ethernet Card/Module NXC-ME260, Programming Manual

Search results

Summary of Contents for NetLinx Master-Ethernet Card/Module NXC-ME260

Reviews:

Related manuals for NetLinx Master-Ethernet Card/Module NXC-ME260

Brands by name

Popular brands