![background image](http://html1.mh-extra.com/html/amx/hdmi-utpro-0808/hdmi-utpro-0808_instruction-manual_2938469079.webp)
HDMI UTPro WebConsole
79
Instruction Manual – HDMI-UTPRO-0808
Clock Manager - NIST Servers (only available if Network Time is selected)
The options on the
NIST Servers
page allow you to select the NIST server that will be queried at each clock
synchronization and allow you to add more NIST servers to the list.
Note:
Only one NIST server is selectable at any given time.
To adjust NIST Servers settings in the Clock Manager:
1.
From the Admin drop down menu, select Clock Manager (or select Mode from the Clock Manager submenu).
2.
Under Time Sync, select Network Time and click Accept.
3.
Click the NIST Servers tab.
4.
To add a NIST server, enter the
NIST Server Name
,
IP Address
and
Location
in the fields provided.
Or
To remove a NIST server from the list, click
Remove
.
5.
Click
Accept
to save your changes. Note that changes on this page take effect immediately.
Or
Click
Cancel
to cancel any changes.
FIG. 54
Clock Manager - NIST Server Manager page