![background image](http://html1.mh-extra.com/html/amx/hdmi-utpro-0808/hdmi-utpro-0808_instruction-manual_2938469075.webp)
HDMI UTPro WebConsole
75
Instruction Manual – HDMI-UTPRO-0808
Logging Into the Configuration Manager (With Security Enabled)
Login is only required if the
Web
and/or
Admin
security options have been enabled on the HDMI UTPro.
To log into the Configuration Manger (with security enabled):
1.
Click the Login link in the upper-right corner of the initial page (FIG. 46 on page 72).
The Login dialog box opens.
2.
Enter the login information:
Default Username =
administrator
Default Password =
password
3.
Click the Login button.
Once you have successfully logged into the Configuration Manager, the
IP Settings
page is displayed, and can be edited
as necessary.
IP Settings
Select
IP Settings
from the Admin drop-down menu to open the
IP Settings
page (FIG. 50). Use the options on the page
to specify network/IP settings for the HDMI UTPro.
Important:
By default, the HDMI UTPro is configured for DHCP
(when the DHCP check box is not selected,
the IP address is static).
Note:
When the DHCP setting is selected and you power the system down and then power back up, the
DHCP server will reassign the IP address, which may or may not be the same address it assigned previously.
Setting a static IP address prevents the possibility of the IP address changing at power up.
FIG. 49
Configuration Manager - Login popup page
FIG. 50
IP Settings page