![background image](http://html1.mh-extra.com/html/amx/hdmi-utpro-0808/hdmi-utpro-0808_instruction-manual_2938469073.webp)
HDMI UTPro WebConsole
73
Instruction Manual – HDMI-UTPRO-0808
Master Connection Tab
Click the
Master Connection
tab in the
Device Configuration
page to view/edit the Master Connection for the
HDMI UTPro (FIG. 47).
Use the options on the
Master Connection
page to view/edit the Connection Mode, Mode Settings and Authentication
Settings for the HDMI UTPro’s connection to the NetLinx Master.
Changing the Connection Mode
The available connection modes are indicated under Connection Mode (default = TCP/IP Auto). Click on the radio
buttons to select the different modes.
Note:
The options under Mode Settings will change, depending on the Connection Mode selected.
Changing the Mode Settings
The supported Connection Modes and the available mode settings for each are described in the following table.
Click
Accept
to save the changes. Changes on this page take effect immediately.
Click
Cancel
to exit the page without saving any changes.
Authentication Settings
If the NetLinx Master requires authentication, enter the
Master Username
and
Master Password
in the applicable fields.
FIG. 47
Device Configuration page (Master Connection tab)
Connection Modes and Mode Settings Options
TCP/IP URL
• Master IP/URL -
• Master Port Number - The default value is
1319
, and
should
not be changed.
TCP/IP Listen • Master Port Number - The default value is
1319
, and
should
not be changed.
TCP/IP Auto
• System Number -
• Master Port Number - The default value is
1319
, and
should
not be changed.
UDP/IP URL
• Master IP/URL -
• Master Port Number - The default value is
1319
, and
should
not be changed.
UDP/IP NDP
• Master IP -
• Master Port Number - The default value is
1319
, and
should
not be changed.