![background image](http://html1.mh-extra.com/html/amx/hdmi-utpro-0808/hdmi-utpro-0808_instruction-manual_2938469109.webp)
Appendix B – Programmer’s Interface for System Diagnostics
109
Instruction Manual – HDMI-UTPRO-0808
FIG. 72
Display for v3i3 (verbosity 3, component 3)
FIG. 73
Display for v3i4 (verbosity 3, component 4)
FIG. 74
Display for v3i5 (verbosity 3, component 5)
~scrv3i3!
[3:Communication Interfaces] count = 4
[interface 1] detected
[type] BCS mode RS232 port, 9600 (8/1/N/E/NS)
[interface 2] detected
[type] Block mode FP port, 115200 (8/1/N/NE/S)
[interface 3] detected
[type] BCS mode RS232 port, 9600 (8/1/N/E/NS)
[interface 4] detected
[type] Neuron bridge undetected.
~scrv3i4!
[4:Hardware Boards] detected
[switching drivers] count = 1
[mtx driver 1] bcpu 8x8 driver on board 2
[fpga version] 0xA3
[bcpu version] v1.0.0
[interface version] v1.0
[bcpu state] ready
[io boards] count = 1
[board 1] 0000
[board 2] 43e1
[board 3] 0000
[board 4] 0000
[expansion boards] count = 0
~scrv3i5!
[5:VM Configuration] count = 2
[vm 0] ‘ALL’ 8x8x1
[vm 1] ‘Video’ 8x8x1
[vm 0 master] 0x2c4 master 0 0 1 (self)
[vm 1 master] 0x2c4 master 0 0 1 (self)