![background image](http://html1.mh-extra.com/html/amx/hdmi-utpro-0808/hdmi-utpro-0808_instruction-manual_2938469100.webp)
HDMI-UTPRO-RX IRL File Transfers
100
Instruction Manual – HDMI-UTPRO-0808
6.
Click Open.
a.
If the selected file has not been mapped to a device, the Enter Device Mapping Information dialog is displayed
b.
Enter the device mapping information, and click OK to return to the Select Files For File Transfer
dialog.
IRL Files are sent to Port 3 (IR Device Port) on the HDMI-UTPRO-RX.
Refer to the “Device Numbering” section on page 91 for information on device numbering for the
HDMI-UTPRO-RX.
Use the Online Tree to determine the device’s assigned ID, if it has been changed.
7.
At this point, the selected IRL File and mapping information is indicated in the File list (FIG. 66):
8.
Click OK to close the Select Files for File Transfer
dialog, and return to the File Transfer dialog. The IR file should
now appear in the files queue (FIG. 67).
9.
Click Send to transfer the file.
Additional Documentation
For additional information on using NetLinx Studio, refer to the
Programming Guide – NetLinx Integrated Controllers
(available at www.amx.com).
FIG. 65
Enter Device Mapping Information dialog (NetLinx Studio)
FIG. 66
Select Files for File Transfer dialog - Files To Send queue (NetLinx Studio)
FIG. 67
File Transfer dialog (NetLinx Studio)
5501
3