![background image](http://html1.mh-extra.com/html/amx/hdmi-utpro-0808/hdmi-utpro-0808_instruction-manual_2938469069.webp)
HDMI UTPro WebConsole
69
Instruction Manual – HDMI-UTPRO-0808
HDMI UTPro WebConsole
Overview
HDMI UTPro has a built-in WebConsole that allows you to make various configuration settings via a web browser on
any PC that has access to the enclosure. The WebConsole consists of a series of web pages that are collectively called the
“Configuration Manager” (FIG. 41).
Minimum Web Browser Requirements
Microsoft Internet Explorer 7.0 or higher, Firefox 3.68 or higher, or any other web browser compatible with
these browsers
Note:
The instructions in this chapter assume that the HDMI UTPro has established an active connection to a
LAN and is receiving power (see page 35).
Determining the IP Address of the HDMI UTPro
The HDMI UTPro features a built-in zero-configuration networking client that allows you to determine the unit’s IP
address via Bonjour or a similar zero-configuration client. Zero-configuration (or Zeroconf, also known as “Bonjour”)
technology provides a general method to discover services on a local area network. In essence, it allows you to set up a
network without any configuration.
Accessing Zero-Config Information in NetLinx Studio 3.0
NetLinx Studio version 3.0 (or higher) features a “Zero-Config” tab in the Workspace Window. This tab provides
Zero-Config networking functionality within NetLinx Studio.
The following assumes that the HDMI UTPro resides on the same LAN as the PC running NetLinx Studio and the
NetLinx Master to which the HDMI UTPro is connected.
To determine IP address by accessing the HDMI UTPro via Zero-Config in NetLinx Studio:
1.
In NetLinx Studio (v3.0 or higher), left-click the Zero-Config tab on the Workspace Bar to open the tab.
2.
Right-click anywhere in the Workspace bar and select Refresh Zero-Config List to generate an initial listing of all
Zero-Config devices that have been detected (FIG. 42).
3.
Click the plus symbol (+) to the left of any device in the Zero-config list to expand its information.
4.
The HDMI UTPro’s current IP Address is listed below the device name.
Note:
Refer to the NetLinx Studio online help for additional details on using Zero-Config
FIG. 41
Configuration Manager - IP Settings page (initial view)
Click here to log in
Hover mouse here to access
the
Admin
drop-down menu