![background image](http://html1.mh-extra.com/html/amx/dgx-aie/dgx-aie_hardware-reference-manual_2939028078.webp)
Control Panel
78
Enova Digital Media Switchers - Hardware Reference Manual
4.
Press the
Select
key again to choose
Master Info
. The Master Info Screen appears.
5.
Press the
Select
key again to choose
System Number
.
- or -
6.
Scroll with the Control Dial to choose other Master Info information.
7.
Press the
Cancel
key to return to the Setup Options sub-menu.
- or -
8.
Press the
Function
key to return to the Function menu.
Default Virtual Matrix
The factory default virtual matrix for the Enova DGX Switcher is
VM 0.
You have the option of changing the factory default virtual matrix for your system. When you choose a new default virtual
matrix, the system will revert to that virtual matrix each time the system is powered up even if you changed the virtual
matrix using the V.Matrix list during normal operation.
The power must be cycled before the default virtual matrix changes are implemented. If you want to immediately switch
on the default matrix, either change the current virtual matrix (see page 71) or cycle the power.
The following example changes the default virtual matrix from VM 0 to VM 2, the audio matrix.
1.
Press the
Function
key. The Function menu appears.
2.
Locate
Setup Options
by scrolling with the Control Dial.
3.
Press the
Select
key. The Setup Options sub-menu appears.
4.
Scroll to
Default VM
. and press the
Select
key. The Default VM list appears.
5.
Scroll to 2:Audio.
6.
Press the
Select
key. The display returns to the top of the Setup Options sub-menu.
7.
Cycle power to implement VM 2 as the default virtual matrix.
- or -
Change the virtual matrix (see page 71) to immediately execute operations on the new default virtual matrix without
cycling power. The next time power is cycled, VM 2 will be implemented as the default virtual matrix.
Reload Config
The Reload Config option is not used in normal operations. Use this option only when directed to do so by technical
support.
1.
Press the
Function
key. The
Function
menu appears.
2.
Locate
Setup Options
by scrolling with the Control Dial.
3.
Press the
Select
key. The Setup Options sub-menu appears.
4.
Scroll to Reload Config.
5.
Press the
Select
key. The configuration file reloads to the Control Panel and the display returns to the top of the Setup
Options sub-menu.
6.
Press the
Function
key to return to the Function menu.
Current Default Virtual Matrix