Enova DGX 100 Series - Overview
33
Enova Digital Media Switchers - Hardware Reference Manual
System Diagnostic Options
The two system diagnostic options for the Enova DGX 100 Series are the Status page in the System Configuration interface
and DGX_SHELL commands.
System Configuration Interface - Status Page
The Status page in the System Configuration interface (Switcher/Status) displays status for the power supplies, fans, CPU,
I/O boards, and expansion boards (see page 141). For complete information, see the
WebConsole & Programming Guide
– NetLinx NX Central Controllers
at www.amx.com.
DGX_SHELL Commands
The Enova DGX 100 Series supports a number of shell (command-line interpreter) commands for a variety of functions,
both basic and advanced (see "Appendix C" on page 273).
Audio and EDID Functionality
EDID Read/Write Support
Use DGX Configuration Software EDID
Programmer tab
Use System Configuration interface to change/save/
load EDID. Changes can be made to either Video or
Audio EDID or a Custom file loaded
Audio Expansion Boards
NOTE:
Only one type of
Expansion Board can be used in
a given enclosure.
Audio Insert/Extract (AIE) Boards Only
• Audio Insert/Extract Boards (AIE)
• Audio Switching Boards (ASB)
NOTE:
ASB must be installed as a pair.
Audio Insert/Extract/Routing
AIE - DIP settings tie insertion/extraction to
I/O channels.
No audio breakaway routing
• AIE - DIP settings tie insertion/extraction to I/O
channels.
• ASB and ASB-DAN - Independent I/O channels for
audio switching, breakaway, and down-mix.
NOTE:
Switched audio also supports DSP functionality.
Outputs utilizing ASB audio must be set to SWITCHED
audio.
down-mixing
Not Supported
Audio Switching Boards support one down-mix channel
(the last audio input) which down-mixes any input
channel and can be routed to any output
Upgrades, Firmware Resets, and Default Restoration
Web Upgrade Status
Web Control Interface link to status page
http://Master_IP_Address/web/upgrade/
systemUpgradeStatus.xml
System Configuration interface System/Devices page,
select the Switcher Update Status button
Failed Upgrade Recovery
Rolls back to previous kit version
Completes the upgrade to attempted kit version and
identifies any mismatch in I/O cards that failed to
update.
This is shown in the OnLine Tree, the System
Configuration interface, and
DGX_SHELL> show
.
Factory Firmware Image Reset
Switcher
N/A
DGX_SHELL> manage firmware
then select "F" for
Factory
Factory Firmware Image Reset
Master and AxLink Controller
N/A
ID Pushbutton on Master or Telnet to Master and type:
manage firmware
then select the device to reset
(
0
or
5001
)
Restore system defaults
BCS command (
~def!
)
NOTE:
only resets MCPU
DGX_SHELL
command
(reset factory)
• resets whole system
System Components
RJ-45 ports
• Left: ENC & ENC
• Right: Public LAN
• Left: ICSLAN (Private LAN - DHCP Server)
• Right: Public LAN
External MicroSD Card
Contains system configuration, presets,
event logs, SRM file.
• Contains no files or data
• Only for file transfer to/from Internal SD Card
Internal MicroSD Card
N/A
Contains sys configuration, event logs, SRM file, current/
previous/factory firmware, EDID Library
ID Button
N/A
• Switch between DHCP and Static - 10 sec hold while
running
• Factory Reset (Master) - 10 sec hold on power up
• Factory Firmware Reset (Master) - 20 sec hold on
power up
Integrated AxLink Control
N/A
AxLink port for control of AMX AxLink devices
Control Panel
Basic control panel functions only.
Displays Integrated Master info and provides basic
audio support (for embedded audio only)
Enova DGX 100 Series and Enova DGX 8/16/32/64 Differences