Integrated Master - NetLinx Programming
209
Enova Digital Media Switchers - Hardware Reference Manual
NetLinx Levels
Digital Media Switchers: SEND_COMMANDs
IMPORTANT:
The SEND_COMMANDs listed in this section are for the switcher only. For additional information on NetLinx
commands used in conjunction with this product, see "WebConsole & Programming Guide – NX-Series Controllers"
(available at www.amx.com).
Note the following port information:
Commands derive their port addressing from the target D:P:S (Device:Port:System).
To distinguish the functionality of signal input and output ports from the overlapped device port numbers,
the
signal input and output numbers are part of the command’s action
.
Video (with/without AIE) input and output ranges:
Enova DGX 800: 1-8
Enova DGX 1600: 1-16
Enova DGX 3200: 1-32
Enova DGX 6400: 1-64
NOTE:
Because the Audio Insert/Extract Board can be set to insert/extract audio into/out of video inputs or outputs, the audio
signals from these boards switch as
embedde
d audio in conjunction with the corresponding video signals.
Audio Switching Board (ASB and ASB-DAN) input and output ranges**:
NOTE:
Audio Switching Board (ASB and ASB-DAN) signal routing is accomplished via SEND_COMMANDs (see below), via the
System Configuration interface (see page 127), or as embedded audio only via the control panel (see page 246).
Enova DGX 800: 1-8 embedded audio, 9-16 audio only
Enova DGX 1600: 1-16 embedded audio, 17-24 audio only
Enova DGX 3200: 1-32 embedded audio, 33-40 audio only
Enova DGX 6400: 1-64 embedded audio, 65-80 audio only
NOTE:
For each system, one port is available as an additional input for down-mix. The down-mix port number follows
sequentially after the last audio only port (e.g., an Enova DGX 800 Switcher?s down-mix port is port number 17).
NOTE:
All text is based on a Unicode index.
NetLinx Levels
Level
Ports
Range
Function
Input Audio
5
All A/V & ASB Inputs
-24 to 24
-24 dB to 24 dB
Output Audio (Switched Audio Only)
1
All A/V & ASB Outputs
0 to 100
Output Volume
2
All A/V & ASB Outputs
-20 to 20
Output Balance
31
All A/V & ASB Outputs
-12 to 12
Audio EQ Band 1
32
All A/V & ASB Outputs
-12 to 12
Audio EQ Band 2
33
All A/V & ASB Outputs
-12 to 12
Audio EQ Band 3
34
All A/V & ASB Outputs
-12 to 12
Audio EQ Band 4
35
All A/V & ASB Outputs
-12 to 12
Audio EQ Band 5
36
All A/V & ASB Outputs
-12 to 12
Audio EQ Band 6
37
All A/V & ASB Outputs
-12 to 12
Audio EQ Band 7
38
All A/V & ASB Outputs
-12 to 12
Audio EQ Band 8
39
All A/V & ASB Outputs
-12 to 12
Audio EQ Band 9
40
All A/V & ASB Outputs
-12 to 12
Audio EQ Band 10
DXLink TX VGA Input Video
17
DXLink TX VGA Inputs
-50 to 50
Video Input Horizontal Shift
19
DXLink TX VGA Inputs
-10 to 10
Video Input Vertical Shift
Output Video
20
All A/V Outputs
0 to 100
Video Output Brightness
22
All A/V Outputs
0 to 100
Video Output Contrast
Output Switching Levels
50
All A/V Outputs
0 to Max Input
Video Switching: Level 50 for each output will be a value from 0 to Highest
Video Input Port indicating which video input is switched to that output.
Changing the value of this level results in a video switch.
51
All A/V & ASB Outputs
0 to Max Input
Audio Switching: Level 51 for each output will be a value from 0 to Highest
Audio Input Port indicating which audio input is switched to that output.
Changing the value of this level results in a audio switch.
