AMX Codec Master Control System, Instruction Manual

Page: 79 / 90

VClink Codec Master Control System Operational Quick Guide 71
CONF, DIAL, MCU, and ECHO CANCEL control screens. Select Far End Control to
see the following Far End Control page (Figure 55).
To change sources at the remote end, select any of the five sources indicated under
the Video Source section. If the quantity of remote camera sources is greater than 5,
select the appropriate Video Group. If the remote site is using pan/tilt cameras, the
following features are available:
•
Zoom In/Out
•
Focus +/-
•
Pan Left/Right
•
Tilt Up/Down
If the remote end has stored camera presets, these are remotely recalled by pressing
the buttons 1 through 4 located in the Camera Presets section.
Figure 55
Far End Camera Control
page