![background image](http://html1.mh-extra.com/html/amx/axd-mca/axd-mca_instruction-manual_2939182029.webp)
Color Active-Matrix LCD Mini-Touch Panels
Installing Mini-Touch Panels
21
PWR (+)
AXM
AXP
GND (-)
PWR (+)
AXM
AXP
GND (-)
UniMount or rack-mount
AXlink connector
Central Controller
12 VDC power supply
PWR (+)
GND (-)
Use a 12 VDC power supply when the distance between the Central Controller and
mini-touch panel exceeds the limits described in Figure 20. Make sure to connect only
the GND wire on the AXlink connector when using a 12 VDC power supply. Do not
connect the PWR wire to the AXlink connector’s PWR (+) terminal.
Cleaning the Touch Panel LCD
You should clean the LCD after installing the touch panel:
1.
Disconnect all connectors from the touch panel.
2.
Using one of two cotton cloths, spray a small amount of cleaning solution con-
sisting of 50% isopropyl alcohol and 50% water onto the cloth.
3.
Wipe the touch overlay. Then wipe dry with the other clean cloth.
4.
Reconnect all connectors to the touch panel.
Figure 24
AXlink and external 12 VDC
power supply, and Central
Controller wiring diagram
Summary of Contents for AXD-MCA
Page 30: ...22 Installing Mini Touch Panels Color Active Matrix LCD Mini Touch Panels ...
Page 68: ...60 Designing Touch Panel Pages Color Active Matrix LCD Mini Touch Panels ...
Page 130: ...122 Touch Panel Program Reference Color Active Matrix LCD Mini Touch Panels ...
Page 180: ...172 Memory Upgrade Color Active Matrix LCD Mini Touch Panels ...