manualshive.com logo in svg

AMX AXD-MCA, Instruction Manual

Share
Download
AMX AXD-MCA Instruction Manual Download Page 114

106

Touch Panel Program Reference

Color Active-Matrix LCD Mini-Touch Panels

 

JOYSTICK NON-CENTER     Sets the button to a four-quadrant joystick
with a control stick. When you move the control stick, the touch panel
sends feedback (data) to the Central Controller and to the external device to
perform a pre-programmed operation. When you remove your finger from
the screen, the control stick and external device stay in that position.

 

JOYSTICK CENTER     Sets the button to a four-quadrant joystick with a
control stick located in the center. When you move the control stick, the
touch panel sends feedback (data) to the Central Controller and to the ex-
ternal device to perform a pre-programmed operation. When you remove
your finger from the screen, the control stick returns to the center of the
button and the external device returns to its default position.

 

CROSSHAIR NON-CENTER     Sets the button to a four-quadrant crosshair
with a control stick located in the center. When you move the control stick,
the touch panel sends feedback (data) to the Central Controller and to the
external device to perform a pre-programmed operation. When you remove
your finger from the screen, the control stick returns to the center of the
button and the external device returns to its default position.

 

CROSSHAIR CENTER     Sets the button to a four-quadrant crosshair with
a control stick. When you move the control stick, the touch panel sends
feedback (data) to the Central Controller and to the external device to per-
form a pre-programmed operation. When you remove your finger from the
screen, the control stick and external device stay in that position.

•

 

STRING

      Opens the keyboard where you enter the data string to be sent to

the Central Controller via AXlink or RF communications. The data string ap-
pears in the STRING button. Press ABORT to close the menu.

Vertical bargraph button

Sets the button type to a vertical bargraph. The BUTTON TYPE: VERTICAL
BARGRAPH and associated features appear in the Properties page for Vertical Bar-
graphs shown in Figure 179.

Summary of Contents for AXD-MCA







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands