manualshive.com logo in svg

AMX AXD-MCA, Instruction Manual

Share
Download
AMX AXD-MCA Instruction Manual Download Page 13

Color Active-Matrix LCD Mini-Touch Panels

Installing Mini-Touch Panels

5

Installing Mini-Touch Panels

Overview

This section describes mounting, wiring, and cleaning the mini-touch panels.
Mounting information includes the cutout dimensions necessary to install the differ-
ent panel types into various surfaces. The wiring guidelines subsection includes in-
structions about preparation, length, and connector pinouts.

Mounting the Mini-Touch Panels

The following paragraphs describe mounting the Decor, UniMount and rack-mount
touch panels. TiltScreen touch panels can be placed on any flat surface.

UniMount- / Decor-style panels with low-profile Back Boxes

These instructions describe installing the UniMount- / Decor-style touch panels listed
in Figure 4.

UniMount- / Decor-style touch panels

UniMount

Decor-style

AXU-MCA (/PB)

AXD-MCA (/PB)

AXU-MCV (/PB)

AXD-MCV (/PB)

Figure 5 shows a sample AXU-MCA (/PB) and low-profile Back Box.

Figure 4

UniMount- / Decor-style touch

panels

Summary of Contents for AXD-MCA







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands