AMX AXD-MCA, Instruction Manual

Page: 132 / 198

Color Active-Matrix LCD Mini-Touch Panels AXCESS Programming 125
System Send_Commands
System Send_Commands (Figure 201) are stored in the Central Controller and direct
the touch panel to perform various operations.
System Send_Commands
Command Description
$SC
Sends a serial port send_command within a panel, as if sent
from Axcess.
Syntax:
"$SC <device off-
set>,"’<send_command>,<variable
text #>,<data>’""
Variables:
device offset = Device number
variable text # = The variable text number value on the touch
panel.
Example:
$SC 1,"’@TXT’,2,’TEXT’"
The string is sends the command to put text on a button with a
variable text value of 2. It is crucial that all the correct ’ and "
be used with no spaces after the commas.
Example:
$SC 1,"’SLEEP’"
Sets a touch panel to sleep.
"'ABEEP'"
Output one panel beep even if the Beep value is set to 0 in the
Setup page.
Example:
SEND_COMMAND TP,"'ABEEP'"
Beeps the panel.
"'ADBEEP'"
Output a double-beep even if the double beep value is set to 0
in the Setup page.
Example:
SEND_COMMAND TP,"'ADBEEP'"
Double-beeps the panel.
Figure 201
System Send_Commands