![background image](http://html1.mh-extra.com/html/amx/axd-mca/axd-mca_instruction-manual_2939182165.webp)
Color Active-Matrix LCD Mini-Touch Panels
Upgrading from G2 to G3 Firmware
157
10.
Enter a file name for the uploaded touch panel file to be saved as into the File
Name field. The file name must follows an MS-DOS 8.3 file naming convention.
The File Name lists those files with the same extension assigned to the type of
panel that was selected.
11.
Select a drive letter from the Drives field in Figure 229. This drop-down list lets
you select the destination drive where you want to save the uploaded file.
12.
Select the directory location where to save the file. The Directories field provides
a directory tree that you can use to select the location where the file will be
stored. The Current Path field shows the location through a directory path.
Figure 228
File drop-down menu
Figure 229
Sample Save as dialog box
Caution
This naming must follow the
8.3 file naming convention for
MS-DOS. By not following this
format, TPDesign.exe will re-
name the file name to match.
Note
This file convention is used
because the TPDesign (16-
bit) doesn’t recognize long
naming conventions.
Summary of Contents for AXD-MCA
Page 30: ...22 Installing Mini Touch Panels Color Active Matrix LCD Mini Touch Panels ...
Page 68: ...60 Designing Touch Panel Pages Color Active Matrix LCD Mini Touch Panels ...
Page 130: ...122 Touch Panel Program Reference Color Active Matrix LCD Mini Touch Panels ...
Page 180: ...172 Memory Upgrade Color Active Matrix LCD Mini Touch Panels ...