![background image](http://html.mh-extra.com/html/amx/axb-tmc/axb-tmc_instruction-manual_2937419028.webp)
Programming
24
AXB-TMC/TMX+ Television Managers
System Send_Commands (Cont.)
PTOF
Sets the IR power-off pulse
time after a power-on pulse.
Syntax:
"'PTOF',<Time>"
Variable:
<Time> = 0 through 255
Sets the IR power-off pulse time after a power-on pulse in increments of
.10 seconds. Time is stored in permanent memory. System default is 15
(1.5 seconds).
Example:
SEND_COMMAND AXBTMX,"'PTOF',15"
Sets the power-off pulse time after a power-on pulse to 1.5 seconds for the
AXB-TMC/TMX+.
The PTOF time affects how quickly the AXB-TMC/TMX+ evaluates the power
state of a TV. If a TV toggles between on and off when changing the power
state, then the PTOF time should be extended. PTOF sets the time in-between
each power pulse when the AXB-TMC/TMX+ is attempting to change the TV's
power state (regardless if pulse if on or off). Refer to the Troubleshooting sec-
tion, page 35, for more information.
?PTOF
Sends the current IR power
pulse off time string
PTOF, <Time> to the Central
Controller.
Syntax:
'?PTOF'
Example:
SEND_COMMAND AXBTMX,'?PTOF'
Sends the current IR power pulse off time from the AXB-TMC/TMX+ to the
Central Controller in the PTOF <Time> format.
PTON
Sets the IR power pulse on
time in increments of
.10 seconds.
Syntax:
"'PTON',<Time>"
Variable:
<Time> = Time is stored in permanent memory. System default is 5 (.5
second). PTON sets the pulse length for all power pulses, regardless if the
pulse is due to a PON or POF command.
Example:
SEND_COMMAND AXBTMX,"'PTON',20"
Sets the IR power pulse on time (delay) to 2 seconds for the AXB-TMC/TMX+.
?PTON
Sends the current IR power
pulse on time string
PTON,<Time> to the Central
Controller.
Syntax:
'?PTON'
Set the <Time> value in .10 second increments.
Example:
SEND_COMMAND AXBTMX,'?PTON'
Sends the current IR power pulse on time from the AXB-TMC/TMX+ to the
Central Controller in the PTON <Time> format.
RO
Sets the offset value sub-
tracted from the IR function
before sending the code to
the AXC-EM.
Syntax:
"'RO',<offset>"
Variable:
<Offset> = 0 through 255
Example:
SEND_COMMAND AXBTMX,"'RO',5"
Subtracts 5 from the incoming IR code number and sends the appropriate IR
function from the AXB-TMC/TMX+ to the Central Controller.