Appendix C - Virtual NetLinx Master
101
Hardware Reference Manual – DXLink™ Twisted Pair Transmitters/Receiver
4.
From the list of “This connection uses the following items” (see previous step), highlight Internet Protocol Version 4
(TCP/IPv4) and click Properties.
The Internet Protocol Version 4 (TCP/IPv4) Properties dialog box opens.
5.
Select “Use the following IP address” and enter 192.168.1.50 (or the IP range of the Enova DGX or Enova DVX).
6.
Press the Tab key on your keyboard to auto-fill the Subnet mask field.
7.
Click OK and click Close.
IMPORTANT:
When finished using the PC as a Virtual Master, change the setting in the dialog box shown in Step 4 back to “Obtain an
IP address automatically.”
Creating a Virtual Master
To create a Virtual Master in NetLinx Studio:
1.
Open NetLinx Studio.
2.
From the Settings menu, select Workplace Communication Settings.
3.
Click the Default Settings button.
The Communication Settings dialog box opens.
Internet Protocol Properties dialog box
Click to open the
Communication Settings
dialog box
