![background image](http://html1.mh-extra.com/html/amx/and-nmx-dec-n3232/and-nmx-dec-n3232_instruction-manual_2938519044.webp)
Encoder Configuration Options
44
N3000 Series User Manual
Stream URL
URL of the device’s network stream. This is shown here for the convenience of users that do not have
admin
privileges (and therefore cannot access the main page for this information).
USB Port
Enable this setting BEFORE plugging in a compatible device into the USB port on the front of the Encoder. Once
the device is validated,
Device
Ready
will display in the
USB
State
field.
File section
Base Name
Specify a base name for the recording file. The actual file name will be the base name plus a time stamp.
Convert to MP4
Turn
On
if you wish to convert the file to an mp4 before transfer.
NOTE:
This requires twice the storage space on the USB drive.
Validate after send
Turn
On
if (after a file is transferred) you would like to automatically pull it back to the unit and verify that it
matches the original file.
NOTE:
This requires twice the storage space on the USB drive.
File Transfer Settings section
Transfer Method
Select a transfer method if you would like the file to be transferred somewhere once recording has stopped.
Options include
SFTP
,
FTP
, and
Network
Share
.
Server Port (FTP or
SFTP)
If your
Transfer
Method
is set to
FTP
or
SFTP
(see above) enter the port number to be used for transfer.
Server Directory
(Share)
If your
Transfer
Method
is set to
Network
Share
(see above) enter the directory on the share where the file will
be stored.
Destination IP Address
The destination IP address applies to all
Transfer
Method
modes. It is the address of the server that will receive
the file.
Server Username
Enter the username to use when validating the file transfer to the server. The username applies to all modes.
Change Password
Enter the password to use when validating the file transfer to the server. The password applies to all modes.
Delete after Transfer
Turn
On
if you would like the file to automatically delete from the USB drive once it has been transferred via the
selected method.
NOTE:
If you use this option, it is recommended that you also enable the Validate after send feature (to
make sure the recording made it to the server).
File Transfer Schedule section
Unit Time
The Encoder’s current time (read only). In order to get accurate real time, the Encoder must be on an IP
address that connects to the Internet and there must be a time server entered (under Settings>Time Settings).
See the
Time Settings
section on page 32 for more information.
Schedule
Select when you would like recording files to be transferred. Choices include:
Never
– Do not transfer the recordings.
Immediate
– Begin transfer as soon as the recording has stopped.
At start time
– All completed recordings will be transferred at the start time specified (see
Start
Time
below).
Time window
– The recordings will be transferred at a random time during the time window determined by the
Start Time and End Time Window settings (see below).
Start Time
If
Schedule
is set to
At start time
or
Time
window
, enter the time you would like to begin the recording transfer.
The time fields are set as a 24 hour clock (0:0 to 23:59).
End Time Window
If
Schedule
is set to
Time
Window
, enter the time you would like to end the window during which recordings are
transferred. The time fields are set as a 24 hour clock (0:0 to 23:59).
TABLE 14
Record Page Options (Cont.)
Option
Description