Encoder Configuration Options
32
N3000 Series User Manual
Time Settings
The section of the
Settings
page shown in
Figure 24
is displayed when you click the
Time Settings
link. Use this section to specify
Network Time Protocol (NTP) servers and the time zone. This information is used to provide accurate stream time stamping.
FIG. 24
Time Settings Section
RS232 Settings
The section of the
Settings
page shown in
Figure 25
is displayed when you click the
RS232 Settings
link. Options are described in
Table 5
.
FIG. 25
RS232 Settings
TABLE 5
Settings Page: RS232 Settings
Option
Description
RS232 Baud Rate
Select the appropriate baud rate for the RS232 serial interface. Default is 9600.
RS232 Data Bits
Select the appropriate data bit count for the RS232 serial interface. Default is 8.
RS232 Parity
Select the appropriate parity for the RS232 serial interface. Default is no parity (
none
).
RS232 Stop Bits
Select the appropriate number of stop bits for the RS232 serial interface. Default is 1.
