AMX AND NMX-DEC-N3232, Instruction Manual

Page: 28 / 72

Encoder Configuration Options
28
N3000 Series User Manual
Stream Settings
The section of the Settings page shown in Figure 22 is displayed when you click the Stream Settings link. Options are described in
Table 2 .
FIG. 22
Stream Settings Section
TABLE 2
Settings Page: Stream Settings Section
Option Description
Encoder Output Mode Set the Encoder’s output type to SVSI decoder , HTTP
live , RTSP , or RTMP.
Refer to Table 3 on page 29 for more details on
Encoder and Decoder configuration considerations
(based on which Encoder Output Mode option you
choose).
Transport Stream Enable to encapsulate the stream as an MPEG2
transport stream
This setting only applies if Encoder Output Mode is
set to SVSI decoder .
Generate Multicast
Stream
Enable to cause the Encoder to also generate an SVSI-
compatible multicast stream.
This setting only applies if Encoder Output Mode is
set to HTTP live or RTMP .
RTP Encapsulation Enable to prepend RTP headers to the AV stream. This setting only applies if Encoder Output Mode is
set to SVSI decoder .
HTTP File Duration (sec) Selects the duration (in seconds) of the individual
HTTP Live Streaming (HLS) files.
This setting only applies if Encoder Output Mode is
set to HTTP live .
RTMP URL Specifies the content delivery service that you want to
send the stream to.
This setting only applies if Encoder Output Mode is
set to RTMP .
RTMP Stream Specifies the content delivery service that you want to
send the stream to.
This setting only applies if Encoder Output Mode is
set to RTMP .
PCM Audio If enabled, the Encoder will also generate an SVSI-
compatible PCM audio stream.
I-Frame Frequency Determines how often an I-frame is injected into the
stream. Example: If set to 10, one I-frame will be
injected for every ten frames.
A higher number in this field results in a better video
quality for the amount of bandwidth used. However,
keep in mind that this setting will affect switching
speed on the Decoder. The higher the number, the
more switching delay experienced.
Multicast Address
Override
Enable to override the upper two octets of the
multicast address with the values specified in the
Multicast Address field (see below).
Multicast Address If Multicast Address Override is enabled, enter the
upper two octets.
UDP Port Number Specifies the UDP port number for the AV stream.