Decoder Configuration Options
51
N3000 Series User Manual
Stream Settings
The section of the
Settings
page shown in
Figure 43
is displayed when you click the
Stream Settings
link. Options are described in
Table 17
.
FIG. 43
Stream Settings Section
TABLE 17
Settings Page: Stream Settings Section
Option
Description
Stream Source
Choose the source type from which the Decoder will
receive the AV stream (
URL
or
SVSI
encoder
).
Stream URL
If
URL
is selected for the
Stream
Source
(see above)
enter the URL from which the Decoder will receive the
AV stream.
Supported formats include:
rtp://
udp://
rtsp://
http://
Support B-Frames
Enable if the stream has B frames to avoid jittery video. Enabling this setting adds 100 ms of latency.
Multicast Address
Override
Enable to override the upper two octets of the
multicast address with the values specified in the
Multicast
Address
field (see below).
Must match the upper two octets of the Encoder’s
multicast address.
Multicast Address
If
Multicast
Address
Override
is enabled, enter the
upper two octets.
Must match the upper two octets of the Encoder’s
multicast address.
UDP Port Number
Specifies the UDP port number for the AV stream.
Must match the Encoder’s UDP port number.
