Introducing Your New N2000 Series Devices
8
N2000 Series User Manual
FIG. 6
N2135 Encoder Rear Panel
FIG. 7
N2235 Decoder Rear Panel
10
1) 12VDC Input (not needed with PoE)
2) Status Indicators
3) RJ45 Auto-Sensing Gigabit Ethernet Switch Port — PoE
4) 1G SFP Port
5) IR Emitter Connection
6) RS232 Connection
7) Analog Audio Input
8) Passthru HDMI Video
9) HDMI Video Input
10) DB-15 Analog Input
1
2
3
8
7
6
5
4
9
1) 12VDC Input (not needed with PoE)
2) Status Indicators
3) RJ45 Auto-Sensing Gigabit Ethernet Switch Port — PoE
4) 1G SFP Port
5) IR Emitter Connection
6) RS232 Connection
7) Analog Audio Output
8) HDMI Video Output
1
2
3
8
7
6
5
4
Front and Rear Panel Descriptions
Front Panel
USB Mini-B port
Connects the Encoder to the computer to be controlled (N2135 only).
USB Standard-A port (x2)
Connects the Decoder to keyboard and/or mouse or touchscreen (N2235 only).
RESET button
Recessed pushbutton. Press to initiate a “warm restart” which causes the processor to reset, but not lose
power. A reset does NOT affect the current settings.
ID button
Recessed pushbutton. Press to send notification out on the network to identify the unit (the notification
causes a pop-up dialog in N-Able and N-Command). Press and hold for 30 seconds to initiate a factory
restore.
POWER LED
On solid (green) when operating power is supplied (via PoE or local power supply). This activity is also
shown by the
PWR
LED on the rear panel.
STATUS LED
On flashing (green) when there is software activity. This activity is also shown by the
STAT
LED on the rear
panel.
Rear Panel
+12V 2A
12 Volt DC power input.
PWR LED
Same as
POWER
LED described above.
HDMI LED
On (green) when an HDMI connection exists.
STAT LED
Same as
STATUS
LED described above.
STRM LED
On (green) when the unit is streaming video.
P0 POE
8-wire RJ45 female.
10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port.
Provides both the network connection and the power to the Encoders and Decoders.
*
Not available on the N2212 Decoder.