Encoder Configuration Options
36
N2000 Series User Manual
Change Password
To change the N2000 Encoder interface password, enter the current password in the field labeled
Old Password
, and enter a new
password in the
New
Password
and
Confirm
Password
fields. Click
Change PW
to accept the new password.
FIG. 8
Change Password
NOTE:
This password needs to match N-Able's stored password to allow auto-login using N-Able.
Software Section
The
Software
section of the
Settings
page is shown in
Figure 9
. Options are described in
Table 6
.
FIG. 9
Software Section
TABLE 6
Settings Page: Software Section
Option
Description
Serial
Displays the serial number of the N2000 Encoder.
MAC Address
Displays the MAC address of the network interface of the N2000 Encoder.
Firmware Version
Displays the date code for the currently running version of the N2000 Encoder internal firmware.
Web Version
Displays the date code for the currently running version of the web interface.
Factory Restore
Click to restore the device to the original factory settings. This resets everything except the IP address
(including name, stream number, serial settings, etc.).
Reboot
Click to reboot the device (does not affect current configuration).