Decoder Configuration Options
53
N2000 Series User Manual
Status Section
The
Status
section of the
Settings
page is shown in
Figure 7
. Options are described in
Table 5
.
FIG. 7
Status Section
Change Password
To change the N2000 Decoder interface password, enter the current password in the field labeled
Old Password
, and enter a new
password in the
New
Password
and
Confirm
Password
fields. Click
Change PW
to accept the new password.
FIG. 8
Change Password
NOTE:
This password needs to match N-Able's stored password to allow auto-login using N-Able.
TABLE 5
Settings Page: Status Section
Option
Description
Notes
HDMI Status
Indicates if video is connected to the Decoder.
Input Resolution
Indicates the video resolution of the incoming video
source.
Port 50001 Source IP
Shows the IP address of the currently connected device
or displays
Disconnected
if no connection exists.
Port 50001 can only accept a single external
connection at a time
. If a device is currently showing
the port occupied (by a control system or other
device), then other connections will be rejected.
However, connection attempts from the same IP will
override the current connection.
Port 50002 Source IP
Shows the IP address of the currently connected device
or displays
Disconnected
if no connection exists.
Port 50002 can only accept a single external
connection at a time
. If a device is currently showing
the port occupied (by a control system or other
device), then other connections will be rejected.
However, connection attempts from the same IP will
override the current connection.
Serial Source IP
Shows the IP address of the currently connected device
or displays
Disconnected
if no connection exists.
Only a single external connection can be accepted on
the port. If a device is currently showing the port
occupied (by a control system or other device), then
other connections will be rejected. However,
connection attempts from the same IP will override
the current connection.
Flush buttons
These buttons reset the port.
KVM IP
Shows the IP address of the KVM Encoder currently
connected to this Decoder.