61
3.10.3
Restore
to
Factory
Set Steps
˖
ķ
Click “
System Tools
”.
ĸ
Select
“Restore to Factory”
.
Parameters Specification:
¾
This
“
Restore
” button is to reset all configurations to the default values. It means the Range
Extender will lose all the settings you have set. So please note down the related settings if
necessary.
¾
Default Password:
admin
¾
Subnet Mask:
255.255.255.0
¾
Default IP:
192.168.1.1
Note
z
If you enable this option, all current settings will be deleted and be restored to factory default
values. You will have to reconfigure Internet connection settings and wireless settings.
z
Do not restore factory default settings unless the following happens:
1> You need to join a different network or unfortunately forget the login password.
Summary of Contents for WR3011
