12
2) If you use Residential broadband, put the network line into the WAN port and follow the step
3-4 as graphical shown to connect your device.
Set Steps
˖
ķ
Connect the modem.
ĸ
Please connect reticle what you ever connected to the computer with the router's WAN port.
Ĺ
Use another reticle to connect your computer Ethernet port with the router’s any LAN port.
ĺ
Connect the router’s power adapter. And the hardware connection is finished.
Note
z
Please use the matched power adapter otherwise it will damage the router.
2.4
Configu
re
local
PC
TCP/IP
Settings
Before you log in to the router, please make sure your computer set to
“Obtain an IP address
automatically” and “Obtain DNS server address automatically” from the device.
ķ
Click
Start -> Control Panel
.
ĸ
Click
Network and Internet
.
Summary of Contents for WR3011
