34
Parameters Specification:
¾
Wireless:
wireless “Enable” or “Disable”.
¾
SSID:
It is the unique name of the wireless network and can be modified.
¾
Broadcast (SSID):
Select “Enable” to enable the router’ SSID to be scanned by wireless
devices. The default is enabled. If you disable it, the wireless devices must know the SSID for
communication.
¾
BSSID:
This is the MAC address of the device's wireless interface.
¾
Channel:
The currently used channel by the router. Select an effective channel of the
wireless network. The default is AutoSelect.
¾
Channel Bandwidth:
Select an appropriate channel bandwidth to enhance the wireless
performance. Select 20/40M when the network has 11b/g/n to promote its throughput
Note
z
The wireless Enable.
z
The SSID must be entered.
Tips
1. The SSID is
WR3011_XXXXXX
by default, where XXXXXX is the last six characters in the
Summary of Contents for WR3011
