AMS Neve AudioFile SC/X User Manual Download

Page: 79 / 391

AudioFile SCX user manual

Revision

0.91

pear.

ENTER key to

nter the desired date using the numeric keypad and press the ENTER key to

oggle the Notes/Software/System SoftKey to Notes.

ny notes that are included in a config file will now be displayed.

tory

ll now be displayed.

SoftKey to System.

The Time entry box will ap

Enter the desired time using the numeric keypad and press the
confirm selection.

Enter Date

Press the ENTER DATE SoftKey.

The Date entry box will appear.

E
confirm selection.

Notes/Software/System (read only)

To view notes

T

A

To view the software direc

Toggle the Notes/Software/System SoftKey to Software.

A directory of the installed software wi

To view system information

Toggle the Notes/Software/System

System information (e.g. the software version, the number of inputs/outputs etc.)
will now be displayed.

AMS Trandisk Interface Window

The AMS Trandisk Interface window shows the banks and volumes which store

e Cues. It is also used to mark drives as removable.

sk Interface window

hen the AudioFile SCX software is running).

To display the Trandi

Double click the Trandisk Interface icon in the System Tray (this is available

Jan 2008

Summary of Contents for AudioFile SC/X








































































































































































































































































































































































































Search results

Summary of Contents for AudioFile SC/X

Reviews:

Related manuals for AudioFile SC/X

Brands by name

Popular brands

AMS Neve AudioFile SC/X, User Manual

Search results

Summary of Contents for AudioFile SC/X

Reviews:

Related manuals for AudioFile SC/X

Brands by name

Popular brands