AMS Neve AudioFile SC/X, User Manual

Page: 232 / 391

AudioFile SCX user manual
232
Revision 0.91
se the traverse zone key if you want to reel rock a different track within the
erse zone active the LH softwheel allows you to
ighlight any event within the current zone without leaving the zone. This will
rack / zone
d play
cross behave. In track mode, only audio on the same track as the current
. In zone mode, the play up to / play from / play across keys
ill play out all the events within the current zone. This allows you to hear the
ation when saving the events
st you must save the events list to a local project . When saving events lists
t you can enable the save zones key so that the zone information
saved into the project at the same time as the events list. The zones can
rnet or backed up onto local drive with the project.
Traverse Zone
U
current zone. With
trav
h
then become the event you hear when reel-rocking.
T
The
track/zone toggle key controls how play up to / play from an
a
event is heard
w
full effect you your edit.
Saving zones
Zones are not saved within the
events list – they are saved within a Project .
Therefore is you want to save the zone inform
li
into a projec
is
then be transferred to Sta
Edit Decision List (optional software module)
AudioFile SCX can read and interpret the majority of industry standard video
he EDL software can ‘lift off’ audio from the original source reels and
udioFile SCX can be instructed to record a few seconds of audio before and
after each edit point, allowing edits can be fine tuned at a later stage.
Essentially it is a two stage process, the first involving the transfer of audio
om source tapes into AudioFile SCX and the second involving the
synchronising of recorded audio to the timecode used on the master video
pe.
Both stages are governed by the Edit Decision List and therefore much of the
rocess is performed automatically.
he REEL box only highlights reels with recordable edits (avoiding
edit controller EDLs.
T
conform it to the timecode used on the edited master reel.
A
fr
ta
p
T
unnecessary entries into the Record Page).
EDL Local Defaults
It is advisable to check and set the EDL parameter in EDL Local Defaults.
Jan 2008