manualshive.com logo in svg

AMS Neve AudioFile SC/X, User Manual

Share
Download
AMS Neve AudioFile SC/X User Manual Download Page 275

 

AudioFile SCX user manual 

275

 Revision 

0.91 

mecode, video and analogue tracks. Recording is normally disabled by 

 a machine. 

The RECORD MODE is now INSERT and track arming for the machine is 

ow possible. 

ress the SoftKeys for the required tracks 

ftKey to arm all tracks. 

Armed tracks will be highlighted in orange. 
 

See Assemble Record for information on arming timecode and/or video 
tracks. 
To disarm tracks 
 

Press the SoftKeys for the required armed tracks. 
 
Or 
 
Press the ALL SAFE SoftKey. 
 

Manual Recording

ti
default to prevent accidental recording to
 

Press the INSERT SoftKey. 
 

n
 
P
 
Or 
 
Press the ALL READY So
 

 

 

Manual recording is performed by pressing the record key in external with the 
MCS page active. Recording is only possible when all external machines are 
locked. 
 

 
Jan 2008 

Summary of Contents for AudioFile SC/X








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands