manualshive.com logo in svg

AMS Neve AudioFile SC/X, User Manual

Share
Download
AMS Neve AudioFile SC/X User Manual Download Page 373

 

AudioFile SCX user manual 

373

 Revision 

0.91 

 
Jan 2008 

 

 

In this mode the start & stop times of each media (bwav) file is shown. There is also an extra 
key available in this mode, T/C SELECT:- 
 

 

 
This option allows you to tag media files within a specified timecode range. 
 
_ Start by untagging all the media files (select all, toggle), then enter the required start & stop 
times. 
 
The system will then tag the media files which fall within the specified range. This can be 
repeated as an additive process, allowing the user to selectively import files. 
 
_ When finished click on CLOSE and then NEXT.

 

 

Summary of Contents for AudioFile SC/X








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands