AMS Neve AudioFile SC/X User Manual Download

Page: 267 / 391

AudioFile SCX user manual

267

Revision

0.91

e Setup Cycle page, see Cycling (in the Recording chapter)

r a detailed description.

faults

This accesses th
fo

Machine Local De

Used to establish the defaults for individual machines. If there are difficulties

al Defaults and make fine

o set Global Defaults see Machine Defaults (Global).

o access local defaults

with locking-up then access Machine Loc

djustments.

T

T

y for the desired transport.

Key.

Highlight the desired machine for adjustment.

ress the M/C Trigger ke

P

Press the LOCAL Hard

ccess the Group Setup page.

ress the LOCAL HardKey.

At the top of the Machine Local Default Page will be the details of the machine

urrently highlighted in the Group Setup Page.

Jan 2008

Summary of Contents for AudioFile SC/X








































































































































































































































































































































































































Search results

Summary of Contents for AudioFile SC/X

Reviews:

Related manuals for AudioFile SC/X

Brands by name

Popular brands

AMS Neve AudioFile SC/X, User Manual

Search results

Summary of Contents for AudioFile SC/X

Reviews:

Related manuals for AudioFile SC/X

Brands by name

Popular brands