manualshive.com logo in svg

AMS Neve AudioFile SC/X, User Manual

Share
Download
AMS Neve AudioFile SC/X User Manual Download Page 306

 

AudioFile SCX user manual 

306

 Revision 

0.91 

With the cue picker window open browse to an archived project and select an 
events list within the project. 
 
The system will read & display all cues used by the events list in the cue 
picker window (note: make sure the “Get cue names from cue pool” default is 
enabled in the project manager defaults). 
 

 

 

o audition a cue:- 

T

ighlight it and click on the play icon. 

 

 from Starnet or the archived project. 

 

R

select ADD, multiple cues can be highlighted for 

electing with 

the mouse. 

Cue(s) selected for import are shown on the right hand side. 

 
H
Or 
Double click on the cue. 

The cue is auditioned directly

To select a cue for import:- 
 

ight-click the cue and 

importing by holding down ctrl or shift on the keyboard whilst s

 

 
Jan 2008 

Summary of Contents for AudioFile SC/X








































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands