En-2
Name and Shape
Q’ty
Description
Operating Manual
1
Installation Manual
1
(This book)
Coupler heat insulation (Large)
1
For indoor side pipe joint (Gas pipe)
Coupler heat insulation (Small)
1
For indoor side pipe joint
(Liquid pipe)
Special nut A (Large fl ange)
4
For installing indoor unit
Special nut B (Small fl ange)
4
For installing indoor unit
Template
(Carton top)
1
For ceiling openings cutting
Also used as packing
Drain hose
1
For installing drain pipe
VP25 (O.D.32, I.D.25)
Hose Band
1
For installing drain hose
Drain hose insulation
1
For installing drain pipe
Remote controller
1
For air conditioner operation
Battery
2
For remote controller unit
Remote controller holder
1
For installing the remote controller
Tapping screw
(M3 × 12mm)
2
For mounting the remote controller
holder
Cable-tie
2
For electrical wiring
Wire clamper
1
For electrical wiring
(*1) This part is not furnished for AUT* series
2.4. Cassette grille accessories
Name and Shape
Q’ty
Description
Connector cover
1
For covering connector
Tapping Screw
(M5 × 12 mm)
4
For mounting cassette grille
Tapping Screw
(M4 × 12 mm)
1
For mounting connector cover
L angle
2
For mounting the Hook Wire to the
Cassette grille
Hook wire
2
For suspending the Cassette grille
Screw [pitch small]
(M4 × 10 mm)
2
For mounting the Hook Wire (for
metals)
Screw [pitch large]
(M4 × 10 mm)
4
For mounting the L angle and Hook
wire (for resins)
2.5. Optional parts
Parts name
Model No.
Summary
Wired remote controller
UTY-RNN*M
Unit control is performed by
wired remote controller
Simple Remote Controller
UTY-RSN*M
For air conditioner
operation
Air outlet shutter plate
UTR-YDZB
Install the plate at outlet
when carrying out 3-way
direction operation
Insulation kit for High
humidity
UTZ-KXGC
External connect kit
UTY-XWZX
For control input/output port
Fresh air intake kit
UTZ-VXAA
To take fresh air
Wired remote controller is recommended using simultaneous twin or triple connection.
3. INSTALLATION WORK
Especially, the installation place is very important for the split type air conditioner because
it is very diffi cult to move from place to place after the fi rst installation.
3.1. Selecting an installation location
Decide the mounting position together with the customer as follows.
WARNING
Select installation locations that can properly support the weight of the indoor unit.
Install the units securely so that they do not topple or fall.
9379124010-05_IM.indb 2
9379124010-05_IM.indb 2
8/31/2012 10:43:06 AM
8/31/2012 10:43:06 AM
AMP Air Conditioning
www.ampair.co.uk | [email protected]
