Amit TE1088 System Manual Download Page 90

Page: 90 / 135

Chapter 3 - Using the Web Configuration Server

The Dynamic DNS window includes the following parameters:

Table 36: Dynamic DNS Parameters

Parameter

Description

DDNS

Click

Enable

Disable

to enable/disable

Dynamic DNS

Provider

Select from the list of Dynamic DNS servers on which you

have an account.

Host Name

Enter to register a domain name to the DDNS provider. The

full domain name is concatenated with the specified Host

Name and a suffix, specified by the DDNS provider.

Username/E-mail

Enter your Username or E-mail address according to the

DDNS provider you selected.

Password/Key

Enter your password or key according to the DDNS provider

you selected.

After Dynamic DNS setting is configured, click Save.

3.9.4

SNMP Setting

The Simple Network Management Protocol (SNMP) provides the user with
the capability to remotely manage a computer network by polling and
setting terminal values and monitoring network events.

Figure 52: SNMP Setting

Using the Web Configuration Server

Summary of Contents for TE1088








































































































































Search results

Summary of Contents for TE1088

Reviews:

Amit TE1088, System Manual, Page: 90 / 135

Search results

Summary of Contents for TE1088

Reviews: