
Basic Setting
The LAN Setup page includes the following parameters:
Table 20: LAN Setup Parameters
Parameter
Description
LAN IP Address
Sets the local IP address of the device. The users on your
network must use this LAN IP address as their default
gateway. You can change it as necessary.
LAN Subnet Mask
Sets the subnet mask to the LAN IP address.
DHCP Server
Enable/Disable to turn off this service. When enabled, the
LAN Setup window display changes (indicated by the red
icon), and the following parameters are displayed (see Figure
24):
Range of IP addresses Pool – Specify the starting and
ending address for DHCP clients. The IP addresses are
allocated from this pool according to calculations based
on the client’s MAC address.
Domain suffix – Specify the domain suffix for DHCP
clients.
Primary DNS – Specify the primary DNS for DHCP
clients.
Secondary DNS – Specify the secondary DNS for DHCP
clients.
Primary WINS – Specify the primary WINS address for
DHCP clients.
Secondary WINS – Specify the secondary WINS address
for DHCP clients.
Lease Time – The time set (in minutes) for IP allocation.
DHCP Proxy
This parameter is available only when DHCP Server is
disabled.
NG System Manual
43
Summary of Contents for TE1088
