
Basic Setting
The Wireless Setting window includes the following parameters:
Table 23: Wireless Setting Parameters
Parameter
Description
Wireless
Enable/Disable – Check the Enable box to enable this
service.
The default setting is "Enable".
Network ID (SSID)
Network ID is used for identifying the Wireless LAN (WLAN).
Client stations can roam freely over this product and other
Access Points that have the same Network ID.
The factory setting is "default".
Channel
The radio channel number. The permissible channels depend
on the Regulatory Domain.
Security
Select the data privacy algorithm you want to protect your
data when being transferred from one station to another. The
available security protocols are:
None – No encryption is applied. (default)
WEP (Wired Equivalent Privacy) – Encrypts frames
transmitted through a wireless module using a pre-
entered WEP key. You can configure 4 key sets and
select one to apply as follows:
WEP 64 bit - 10 hexadecimal digits
WEP 128 bit – 26 hexadecimal digits
WEP 256 bit – 58 hexadecimal digits
802.1x – When enabled, the wireless user must be
authenticated before it is allowed to use the network
services. One implementation of 802.1x (the most
common one) is through a RADIUS server on your LAN,
containing an authentication database.
Encryption Key Length – Select either 64 or 128 bits
for the encryption key.
RADIUS Server IP – The 802.1x server's IP address.
RADIUS Port – The 802.1x server's service port.
WPA-PSK - Accepts WPA clients only. Manually enter a
pre-share key (encryption key) as follows:
NG System Manual
49
Summary of Contents for TE1088
