manualshive.com logo in svg

Amit TE1088, System Manual, Page: 43 / 135

Share
Download
Amit TE1088 System Manual Download Page 43

Wizard (Administrator only)

Set the following parameters:

Table 11: Setup Wizard – Dynamic IP Address with Road Runner Session Management

Parameters

Parameter

Description

LAN IP Address

The local IP address of the device.

The default IP address is 192.168.254.253. To change the IP

address enter a new value.

Account

The account provided by the service provider. If you do not 

want to change the account, leave empty. At initial entry, you

are required to enter an account.

A string of up to 53 printable characters.

The default is an empty field.

Password

The password provided by the service provider. If you do not

want to change the password, leave empty. At initial entry,

you are required to enter a password.

A string of up to 53 printable characters.

Login Server

The Login Server (optional). Leave empty if you want the 

default server. 

‘

PPP over Ethernet

Figure 11: Setup Wizard – PPP over Ethernet

NG System Manual

29

Summary of Contents for TE1088








































































































































Reviews:

No comments